top of page
PAC F88 E 150HP

PAC F88 E 150HP

The PAC Electric Atlas Copco pump series is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the Construction dewatering and municipal market segment where reliability, serviceability and versatility is the key to provide a customized solution. Other suitable applications can be found within the Industry, Mining or Oil & Gas segment. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.

PAC F88 Electric - Vacuum prime centrifugal pumps
The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. The PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency

  • SPECS

    Pump  
    Model PAC F88 E 150HP
    Qmax 3,950 USgpm
    Hmax 200 ft
    Q max eff. 3,100 USgpm
    Eff. max 82%
    Suction port 8" Flange - ANSI class 150 
    Delivery port 8" Flange - ANSI class 150 
    Impeller type Closed, 2 vane
    Impeller diameter 12"
    Solids handling 3"
    Material  
    Casing ASTM A536 ductile iron
    Impeller ASTM A536 ductile iron
    Wear Plate ASTM A48 Class 20 grey iron
    Shaft AISI 630 stainless steel 
    Mechanical Seal faces Silicon carbide / Silicon carbide / VITON
    Elastomers NBR + VITON
    Lubrication Grease (bearings)
    Check Valve ASTM A536 ductile iron + NBR rubber flap
    Separator EN AC-42100 ( AlSi7Mg0.3) -Aluminium alloy 
    Priming System  
    Vacuum pump  
    Vacuum pump type Diaphragm
    Nominal air capacity 50 cfm
    Max vacuum - 26.6 inHg
    Drives Link belt

     

     

    Engine  
    Make Weg
    Type Three Phase Induction Motor
    Cooling Method IC411 - TEFC
    No. poles 4
    Tension supply 460 V
    Frequency 60 Hz
    Rated Power 150 HP
    Rated Speed 1,784 rpm
    Rated Current 170 A
    Efficiency class W22 NEMA premium efficiency
    Max Effiency 95.8%
    Protecting rating IPW55
    Insulation class F
    Thermal Protection Thermistors 2 Wires - 311degF
    Duty Cycle Continuous - S1
    Arrangement  
    Technical data  
    Material ASTM A36 steel
    Coatings Epoxy powder, average thickness of 3 MIL
    Features Lifting beam. Fork lift pockets. Pump access through hinged door.
    Dry weight 4520 lbs

  • PERFORMANCE CURVES

    Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
    Various 12" / 315 mm Closed 3" / 76 mm 2000 rpm 8" / 200 mm 8" / 200 mm 2
bottom of page