top of page
PAC H64 E 350HP

PAC H64 E 350HP

The PAS 100 HF Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the Construction dewatering and municipal market segment where reliability, serviceability and versatility is the key to provide a customized solution. Other suitable applications can be found within the Industry, Mining or Oil & Gas segment. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers.

PAC H64 Electric - Vacuum prime centrifugal pumps
The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. The PAC range is also suitable for pumping liquids with solids in suspension with best possible efficiency

  • SPECS

    Pump  
    Model PAC H64 E 350HP
    Qmax 1,900 USgpm
    Hmax 380 ft
    Q max eff. 2,100 USgpm
    Eff. max 69%
    Suction port 6" Flange - ANSI class 150
    Delivery port 4" Flange - ANSI class 150
    Impeller type Enclosed, 2 vane
    Impeller diameter 17"
    Solids handling 3"
    Material  
    Casing ASTM A536 ductile iron
    Impeller ASTM A743 CA6NM
    Wear Ring ASTM A48 Class 20 cast iron
    Wear Plate ASTM A48 Class 20 Grey Iron + NBR rubber coating
    Shaft AISI 630 stainless steel
    Mechanical Seal faces Silicon carbide Vs Silicon carbide
    Elastomers VITON
    Check Valve ASTM A536 ductile iron + NBR rubber flap
    Separator Steel
    Priming System  
    Vacuum pump  
    Vacuum pump type Diaphragm
    Nominal air capacity 50.0 cfm
    Max vacuum - 26.6 inHg
    Drives Link belt

     

     

    Engine  
    Make Weg
    Type Three Phase Induction Motor
    Cooling Method IC411 - TEFC
    No. poles 4
    Tension supply 460 V
    Frequency 60 Hz
    Rated Power 350 HP
    Rated Speed 1,790 rpm
    Rated Current 384 A
    Efficiency class W22 NEMA premium efficiency
    Max Effiency 96.2%
    Protecting rating IPW55
    Insulation class F
    Thermal Protection PTC Thermistors
    Duty Cycle Continuous - S1
    Arrangement  
    Technical data  
    Material ASTM A36 steel
    Coatings Epoxy powder, average thickness of 3 MIL
    Features Lifting beam. Fork lift pockets. Pump access through hinged door.
    Dry weight 6,724 lbs

  • PERFORMANCE CURVES

    Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
    Various 17" / 440 mm Enclosed 3" / 76 mm 1800 rpm 6" / 150 mm 4" / 100 mm 2
bottom of page