PAS 100 HFS T4F YD
The PAS 100 HFS Atlas Copco pump is designed to withstand toughest applications and delivers best in class pumping efficiency. One of the most common area of utilization is the Construction dewatering and municipal market segment where reliability, serviceability and versatility is the key to provide a customized solution. Other suitable applications can be found within the Industry, Mining or Oil & Gas segment. Atlas Copco pumps are packed with features that not only meet, but exceed the needs of our customers..
PAS HFS - Vacuum prime centrifugal pumps
The pump system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible. Even with suction heights of several feet the machine rapidly evacuates the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension.
SPECS
Pump Model PAS 100HFS T4F Qmax 1230 USgpm Hmax 110 ft Q max eff. 680 USgpm Eff. max 75% Suction port 4" Flange - 150# ANSI Delivery port 4" Flange - 150# ANS Impeller type Semi-open, 3 Vane Impeller diameter 10" Solids handling 1.8" Material Casing EN-GJL-200 cast iron Impeller EN-GJS-500 ductile iron Wear Plate EN-GJL-200 cast iron Shaft 39NiCrMo4 steel Mechanical Seal faces Tungsten carbide / Tungsten carbide Elastomers VITON Check Valve ASTM A536 ductile iron + NBR rubber flap Separator EN GJL-200 cast iron ( AlSi7Mg0.3) - Aluminum Priming System Vacuum pump Vacuum pump type Diaphragm Nominal air capacity 29.6 cfm Max vacuum - 26.6 inHg Drives Link belt Engine Make Yanmar Model 3TNV88 Type Diesel common rail Displacement 1.6 Liter (100inĀ³) No. cylinders 3 Cooling Liquid with radiator Rpm type Variable Max operating speed 2.200 rpm US emissions EPA Tier 4F Starting Electric Engine system voltage 12 V Engine Power rating 25 HP Control panel Model PW 750 Manual operation Automatic operation: start-stop with transducers or floats FleetLink Optional Arrangement Technical data Material ASTM A36 steel Coatings Polyester powder, average thickness of 3 MIL Features Lifting beam, PE-Fuel tank and Fender Battery Acid charge Pb-Ca maintenance free, 12 V - 630 CCA Fuel tank capacity 30 USG Net Volume Fuel consumption 1.0 US Gal/hr @2200 rpm @BEP Dry weight 2810 lbs Wet weight 3095 lbs Performance Curves
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes Various 10" / 250 mm Semi-Open 1.8" / 45 mm 2200 rpm 4" / 100 mm 4" / 100 mm 3