top of page
TEX 280 PE

TEX 280 PE

The Atlas Copco TEX 280 PE are hand-held light and medium pneumatic breakers designed for vertical use demolition of materials such as concrete, asphalt and brickwork.
TEX 280 PE is a solid body concept from a single cast reduces the need for bolts that might break. The anvil block has been refined to handle and deliver impact energy. But heavy tools and massive power means a lot of responsibility on our behalf. We are specially proud of HAPS (Hand Arm Protection System) that reduce vibration levels and allow up to seven times as much trigger time compared to a conventional breaker. Together with the slim polyurethane silencer that reduces noise by 75 percent.
 
FEATURES
 
  • H.A.P.S  
  • One-piece solid body
  • Sofstart – make the first blow count
  • Air cushions
 
BENEFITS
 
  • Up to seven times the trigger time of conventional fixed handled machines
  • High comfort and performance, without adding unnecessary weight
  • Less maintenance and longer life
  • Balanced performance
  • Smooth breaking

  • SPECS

    Vibro-reduced   Yes
    Weight  lbs  69
    Length in  27.2 
    Air consuption at 6 bar CFM  68 
    Impact rate BPM  1,230 
    Vibration level 3 axes (ISO 28927-10)  m/s² 4.8
    Sound power level guaranteed (2000/14/EC) Lw, dB(A) 105
    Sound pressure level (ISO 11203)  Lp, r=1m 92
    Shank size: Hex  in 1-1/8" x 6"
    Shank size: Hex 2 in 1-1/4" x 6"

  • ACCESSORIES - Shanks

    Shank - H 1-1/8" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 0.6 21.5 -
      17.7 24.25 -
      39.4 46 -
    Narrow chisel 0.6 22 1.25
      17.7 24.25 1.25
      39.4 46 1.25
    Wide chisel 0.6 21.5 3
    Asphalt cutler 11.8 18.3 4.5
    Digging chisel 0.6 21.5 3
    Digging spade 0.6 21.5 5
    Clay spade 0.6 21.5 5.5
    Wedge chisel 15.75 22.3 1.5
    Shaft for tamping pad 9 15.6 -
    Tamping pad, round - - ø7
    Tamping pad, square - - ø6
    Tamping pad, square - - ø8

     

     

    Shank - H 1-1/4" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 15 21.5 -
      17.7 24.25 -
      29.4 46 -
    Narrow chisel 15 21.5 1.4
      17.7 24.25 1.4
      39.4 46 1.4
    Wide chisel 15 21.5 3
    Asphalt cutler 11.8 18.3 4.5
    Digging chisel 15 21.5 3
    Digging spade 15 21.5 5
    Clay spade 15 21.5 5.5
    Wedge chisel 15.75 22.3 1.5
    Shaft for tamping pad 9 15.8 -
    Tamping pad, round - - ø7
    Tamping pad, square - - ø6
    Tamping pad, square - - ø8

     

     

    Shank - H 1-1/8" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 15 20 -
    Narrow chisel 15 20 -
    Wide chisel 15 20 3
    Digging chisel 15 20 3
    Digging spade 15 20 4.75
    Clay spade 17 21.7 5
    Wedge chisel 15 20 1.4
    Shaft for tamping pad 11 15.75 -
    Tamping pad, round - - ø7 
    Tamping pad, square - - ø7 
bottom of page