top of page
TEX P60S

TEX P60S

The Atlas Copco TEX P60S are hand-held light and medium pneumatic breakers designed for vertical use demolition of materials such as concrete, asphalt and brickwork.
TEX P60S is a solid body concept from a single cast reduces the need for bolts that might break. The anvil block has been refined to handle and deliver impact energy. But heavy tools and massive power means a lot of responsibility on our behalf. We are specially proud of HAPS (Hand Arm Protection System) that reduce vibration levels and allow up to seven times as much trigger time compared to a conventional breaker. Together with the slim polyurethane silencer that reduces noise by 75 percent.
 
FEATURES
 
  • H.A.P.S  
  • One-piece solid body
  • Sofstart – make the first blow count
  • Air cushions
 
BENEFITS
 
  • Up to seven times the trigger time of conventional fixed handled machines
  • High comfort and performance, without adding unnecessary weight
  • Less maintenance and longer life
  • Balanced performance
  • Smooth breaking

  • SPECS

    Vibro-reduced   No No
    Weight  lbs  72.8 72.8
    Length in  27.2   
    Air consuption CFM  76.3   
    Impact rate BPM  1,500   
    Vibration level 3 axes (ISO 28927-10)  m/s² 16.8  
    Sound power level guaranteed (2000/14/EC) Lw, dB(A) 109  
    Sound pressure level (ISO 11203)  Lp, r=1m 97  
    Shank size: Hex  in 1-1/4" x 5/8"   

  • ACCESSORIES - Shanks

    Shank - H 1-1/8" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 0.6 21.5 -
      17.7 24.25 -
      39.4 46 -
    Narrow chisel 0.6 22 1.25
      17.7 24.25 1.25
      39.4 46 1.25
    Wide chisel 0.6 21.5 3
    Asphalt cutler 11.8 18.3 4.5
    Digging chisel 0.6 21.5 3
    Digging spade 0.6 21.5 5
    Clay spade 0.6 21.5 5.5
    Wedge chisel 15.75 22.3 1.5
    Shaft for tamping pad 9 15.6 -
    Tamping pad, round - - ø7
    Tamping pad, square - - ø6
    Tamping pad, square - - ø8

     

     

    Shank - H 1-1/4" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 15 21.5 -
      17.7 24.25 -
      29.4 46 -
    Narrow chisel 15 21.5 1.4
      17.7 24.25 1.4
      39.4 46 1.4
    Wide chisel 15 21.5 3
    Asphalt cutler 11.8 18.3 4.5
    Digging chisel 15 21.5 3
    Digging spade 15 21.5 5
    Clay spade 15 21.5 5.5
    Wedge chisel 15.75 22.3 1.5
    Shaft for tamping pad 9 15.8 -
    Tamping pad, round - - ø7
    Tamping pad, square - - ø6
    Tamping pad, square - - ø8

     

     

    Shank - H 1-1/8" x 6"      
      Working length (in) Total length (in) Tip Width (in)
    Moil point 15 20 -
    Narrow chisel 15 20 -
    Wide chisel 15 20 3
    Digging chisel 15 20 3
    Digging spade 15 20 4.75
    Clay spade 17 21.7 5
    Wedge chisel 15 20 1.4
    Shaft for tamping pad 11 15.75 -
    Tamping pad, round - - ø7 
    Tamping pad, square - - ø7 
bottom of page