WEDA D40N
The WEDA D40N drainage pump features a max head of up to 72ft, max flow of 450USgpm, and can withstand solids of up to 0.27in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
SPECS
Product Code WEDA D40N Installation Portable drainage pump Hydraulic range N - normal head Insulation class F (+155°C/+311°F) IEC 85 Protection class IP68 Voltage variation Max ± 5% of nominal voltage Voltage imbalance Max 2% - between phases Max start-stop Max 30 starts/hour Cable H07RN-F (20 m) or SOOW AWG (65 ft) Casted parts Corrosion resistant aluminum Impeller High chrome iron, 55±5 HRC Wear parts Rubber (NBR) Strainer Hard sole - reinforced polyethylene Shaft Stainless steel O-rings Rubber (NBR) Main bearing Single row ball bearing in oil Mechanical seal Primary + secondary: grease lubricated lip seal on WC wear sleeve Built-in controls and protection 1 ph: capacitor + contactor 3 ph: contactor + control relay Thermal contacts 140°C / 284°F Options / accessories Float switch
Zinc anodes
Epoxy coating
Low suction collar
Quick couplings (hose / NPT / ISO-G / Camlock / Storz)
Pump raft
Terminal board
NSSHÖU screened cable
Slim adapter
Solids handling, strainer hole 0.27 in Liquid temperature Max 104°F Depth of immersion Max 65 ft Max liquid specific gravity 1.1 pH of the pumped liquid pH 5–8 Weight and dimensions N - Normal Head Discharge connection (in) 3 Hieght (in) 20.6 Width (in) 11.4 Diameter (in) 8.7 Diameter (in) 56 power rating
Rating 3 ph Standard Cable Power P1 3.8 kW Power P2 4.3 HP Shaft speed 3500 r.p.m. 230 V 12 A AWG16/14 460 V 6 A AWG16/14 575 V 4.8 A AWG16/14