WEDA D70H
The WEDA D70H drainage pump features a max head of up to 254ft, max flow of 300USgpm, and can withstand solids of up to 0.27in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
SPECS
Product Code WEDA D70H Installation Portable drainage pump Hydraulic range L - high flow
H - high head
Insulation class F (+155°C/+311°F) IEC 85 Protection class IP68 Voltage variation Max ± 5% of nominal voltage Voltage imbalance Max 2% - between phases Max start-stop Max 30 starts/hour Cable H07RN-F (20 m) or
SOOW AWG (65 ft)
Casted parts Corrosion resistant aluminum Impeller High chrome iron, 55±5 HRC Wear parts Rubber (NBR) Strainer Corrosion resistant aluminum Shaft Stainless steel O-rings Rubber (NBR) Main bearing Double row ball bearing in oil, pre-greased Mechanical seal Cartridge-type, primary + secondary: SiC/SiC Built-in controls and protection contactor + control relay + overload relay Thermal contacts 140°C / 284°F Options / accessories Float switch
Zinc anodes
Epoxy coating
Quick couplings (hose / NPT / ISO-G / Camlock / Storz)
Pump raft
Terminal board
Softstarter NSSHÖU screened cable
Slim adapter D70H
Solids handling, strainer hole 0.39 in Liquid temperature Max 104°F Depth of immersion Max 65 ft Max liquid specific gravity 1.1 pH of the pumped liquid pH 5–8 Weight and dimensions L - High Head Discharge connection (in) 4 Hieght (in) 37.1 Width (in) 15.5 Diameter (in) 14.6 Diameter (in) 244 power rating
Rating 3 ph Standard Cable Power P1 17 kW Power P2 18 HP Shaft speed 3500 r.p.m. 460 V 24 A AWG8 575 V 18.2 A AWG10