WEDA D90H
The WEDA D90H drainage pump features a max head of up to 325ft, max flow of 560USgpm, and can withstand solids of up to 0.27in.
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are particularly suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
SPECS
Product Code WEDA D90H Installation Portable drainage pump Hydraulic range L - high flow
H - high head
Insulation class F (+155°C/+311°F) IEC 85 Protection class IP68 Voltage variation Max ± 5% of nominal voltage Voltage imbalance Max 2% - between phases Max start-stop Max 30 starts/hour Cable H07RN-F (20 m) or
SOOW AWG (65 ft)
Casted parts Corrosion resistant aluminum Impeller High chrome iron, 55±5 HRC Wear parts Rubber (NBR) Strainer Galvanized steel Shaft Stainless steel O-rings Rubber (NBR) Main bearing 2 x single row ball bearing in oil Mechanical seal Primary + secondary: SiC/SiC Built-in controls and protection contactor + control relay + overload relay Thermal contacts 140°C / 284°F Options / accessories Float switch
Zinc anodes
Epoxy coating
Quick couplings (hose / NPT / ISO-G / Camlock / Storz)
Pump raft
Terminal board
Softstarter
NSSHÖU screened cable
Slim adapter D90H
Solids handling, strainer hole 0.27 in Liquid temperature Max 104°F Depth of immersion Max 65 ft Max liquid specific gravity 1.1 pH of the pumped liquid pH 5–8 Weight and dimensions H - High Head Discharge connection (in) 4 Hieght (in) 43.3 Width (in) 18.9 Diameter (in) 15.8 Weight (excl. cable) (lb) 400 power rating
Rating 3 ph Standard Cable Power P1 33 kW Power P2 40 HP Shaft speed 3500 r.p.m. 460 V 47 A 2xAWG8 575 V 37 A AWG6